Vu+, stavite novi img u svoj prijemnik – UPUTE

To install a new image, you need an empty USB stick FAT32 formatted.

1. Download image zip file for your Vu+ model;
2. Unzip the zip file and you will have a folder named vuplus and under the folder, you will have another folder named after the model of your VuPlus set;
3. Copy the vuplus folder (including all the sub folders and files in it) to root folder of your USB stick;
4. WARNING!!! If you have any folder named vuplus on any device connected to your Vu+, delete the folder or rename it;
5. Turn off your Vu+;
6. Disconnect all USB flash drives connected to your receiver;
7. If your receiver is equipped with a front USB port (Duo2, Ultimo, etc.), insert the USB stick in it, otherwise you can insert the USB stick in a rear port.;
8. Turn on your Vu+.

If, for any reason, the upgrade fails, first disconnect any USB devices connected to your Vu+ and then try again to install the new image.
If the upgrade fails again, try to use another USB stick.

Vu+ Duo​

Update is done when upgrade completed message is shown on the display.

Vu+ Duo2​

Push POWER button on the box (not on remote control!) when message appears on display.
Update is done when upgrade completed message is shown on the display.

Vu+ Solo​

Update is done when green light blinks on the front panel.

Vu+ Solo2​

Push POWER button on the box (not on remote control!) when message appears on display.
Update is done when upgrade completed message is shown on the display.
Vu+ SoloSE​

Update is done when the LED on front panel remains lit briefly and then starts blinking rapidly.
Vu+ Ultimo

Push – button on the box (not on remote control!) when message appears on display.
Update is done when upgrade completed message is shown on the display.
Vu+ Uno​

Push CH- button on the box (not on remote control!) when message appears on display.
Update is done when upgrade completed message is shown on the display.

Vu+ Zero​

Update is done when the LED blinks on the front panel.

Komentari

comments